Is it ok for 3 or 4 computers to share one AVR? Is it dangerous?

I have 4 computers and I want these to share one AVR (Automatic Voltage Regulator), is this dangerous? can it damage my computer units?

Is it ok for 3 or 4 computers to share one AVR? Is it dangerous?spyware remover

The typical desktop computers are not using much electricity. I had the same concern with my 4 desktops plus 2 printers, scanner, modem, router, UPS, and few other devices connected to the same outlet. I hired electrician to take a look. It turned out that my entire load was less then 2 Amps, while the line is capable of handling something like 12 Amps on a single circuit breaker. It turned out that I also had the washer and drier on the same circuit and even that, when added to the load, didn't exceed the maximum capacity.

If your AVR can handle 2 amps of load (and it should), you would be fine.

Why can't I see my other computers on my network?

I have 2 computers running windows xp, and a printer wired into my wireless router I have a laptop running windows vista I can connect to the internet and the printer, but can't see my other computers

Why can't I see my other computers on my network?spyware

check if your workgroup is same and see that computer browser service is running on your computer.

Why can't I see my other computers on my network?virus scan

basically, if you properly installed and configure your units, you won't have trouble about your networks. why try checking your firewall or try to share something to your computers. it would be better if you declare something to share to your computer. and these will determined by the computers. especially when you are using XP.
With windows XP PCs should see each other even when the workgroup names are different. Can the other two machine see each other? This looks like a firewall issue. Try disabling the firewall on the machines for a brief time and checking to see if the all the PCs can see each other. I would suggest that you disconnect the router from the internet before you disable the firewall(s) to prevent security problems. You can do this by pulling out the lead connecting the router to the telephone socket. This will not stop your network from working. To see a resource (drives and folders) of other PC's this needs to be shared first. To do this do a right click, (or as my friend Jabba says do a wrong click :) then select sharing and security , click the share this folder radio button and click OK. You probably need to wait a little while windows Vista discovers this newly shared resource. Let me know how you get on with this.
Yer Jameer probably right check that your on the same work group. also if you have manually assigned the ip address check that the first three sets of number are the same and the the last set diffrent i.e 192.168.1.2 and 192.168.1.4
I am having the same problem. So far I have discovered that running the Windows Network wizard is incompatibel with my BT Home Hub. Network wizard sets the ICS (Internet Connection Sharing) but I have to disable it. The Windows Help file take me to Network Connections but thereafter the instructions don't match what I see. No checkboxes match the instructions for the properties window.
Configure the designated Master Browse Server computer as the preferred Master Browse Server.

Launch the REGEDIT utility by clicking Start\Run\Regedit.exe.

Set the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControl... \MaintainServerList registry setting to Yes.

For all the other computers on the network, configure them to be ineligible to become a browse server.

Launch the REGEDIT utility by clicking Start\Run\Regedit.exe.

Set the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControl... \MaintainServerList registry setting to No.

Why does the system32 folder open when I first start my computer after I install yahoo messenger on

I have installed yahoo messenger on 4 computers today (I do computer repair), and the system 32 folder opens when I first boot the computers. This occurs after I install yahoo messenger. Any help???

Why does the system32 folder open when I first start my computer after I install yahoo messenger on computers?stinger

dare will be a command to run explorer (my computer kind a thing ) in register most probably. run regedit and look in microsoft -%26gt; windows -%26gt; current version -%26gt; run fields to find out exactly which

Why does the system32 folder open when I first start my computer after I install yahoo messenger on computers?virus scanner

the new yahoo has a cookie inbeded in it

Why doesn't my computers ethernet port allow my broadband modem to connect to it.?

Ok so there seems to be something wrong with my computers ethernet port. I have tried 3 different modems and several different ethernet cords. I can currently use the internet via the usb port but i need to get the ethernet port going. The man from time warner said that it is not a problem with the modem but that there is some type of program overriding the ethernet port. Where can i find out what is overriding the ethernet port? When i connect it to the modem it tries to issue an ip address and then a few secs later it says a network cable is unplugged.

Why doesn't my computers ethernet port allow my broadband modem to connect to it.?suzuki

It's one of these 3:

Bad Driver

Failed (failing) NIC

Bad cable.

If it's a driver problem, should be easy to find the manufacturer's site and get the updates. A failed NIC is a little harder as this has you buying a new one (for about $5) and opening the comptuer and installing it. The cable really could be the problem here. Make sure you're not trying to use a crossover cable. Yes there are testers you can buy that will tell you for sure, but you already own the BEST testing set on the market. Your eyes. Have a look at the individual wires on each end. Flip them over so the little retention clip is facing down. Now, you'll see 8 tiny wires and they're color coded, blue/blue white, orange/orange white, green/green white, brown/brown white. IF you're using a straight cable, the wires will be the same on each end. IF you're using a crossover cable, pins 1,2,4,6 will be switched. See my example below. Good luck. Feel free to E-mail me through Yahoo answers if you need more help.

What is a full from of IBM computers?

International bussens marketing computers.this is the computer in the world.

What is a full from of IBM computers?symantic

International Business Machines Corporation (known as IBM or "Big Blue"; NYSE: IBM) is a multinational computer technology and consulting corporation headquartered in Armonk, New York, USA. The company is one of the few information technology companies with a continuous history dating back to the 19th century. IBM manufactures and sells computer hardware, software, infrastructure services, hosting services and consulting services in areas ranging from mainframe computers to nanotechnology.

What is a full from of IBM computers?viruses

IBM - International Business Machines....
International Business Machines
International Business Machines Corporation (known as IBM or "Big Blue"; NYSE: IBM) is a multinational computer technology corporation headquartered in Armonk, New York, USA. The company is one of the few information technology companies with a continuous history dating back to the 19th century. IBM manufactures and sells computer hardware, software, infrastructure services, hosting services and consulting services in areas ranging from mainframe computers to nanotechnology.[3]

How to network 2 computers what are all the settings to be done?

2 computers with windows XP as OS , and having the network cable , what are the settings to be done in network card properties ,which protocol to select(client for microsoft network, or what is it necessary to assighn ip address for the 2 systems explain in detail?

How to network 2 computers what are all the settings to be done?symatec

If you want both to connect to the internet, there are some variables.

If you are using a cable modem:

Connect the cable modem to the wall, and connect the network cable to a ROUTER. A router is a device that splits the internet into 2 or more computers. Just go to walmart and pick up a router. I use a WRT54G. After you buy the router, plug the cable modem into the router. Plug each of your computers into the router. You should be set to go.

If not:

go to Control Panel.

Network Connections.

Set up a home or office network.

any more info you can provide me will be good :)

How to network 2 computers what are all the settings to be done?vista

Just use a crossover cable to connect both computers and follow this short guide to bring the network up. It's pretty easy..

How to connect 2 computers using crossover cable:

http://www.home-network-help.com/crossov...

:o)

picoHat

How can i connect two or more computers to browse the internet with a switch?

i want my three computers to access the internet, and i have a 3 com switch with 10 ethernet ports but i don't know how to connect all of my computers to it so that they can share the internet connection.

How can i connect two or more computers to browse the internet with a switch?systemworks

You need to have a router (if you have DSL or Broadband Internet connection).

You need to configure the router to access the Internet (Instructions are based on router model/brand) and to share the Internet connection with all devices attached to the Switch.

So you have to connect your router to the switch and your computers to the LAN ports on the switch.

How can i connect two or more computers to browse the internet with a switch?windows

You can try setting up a network between the computers and if you dont know how there is help option called networking that shows how to set it up.
buy a LAN bridge....

1 ethernet can come to 3-6 output...
u need a LAN cable and a proxy.

connect internet on one system

type ip address of first one into default gateway of other.

BOL

amit